Danby DWM045WDB Bedienungsanleitung Seite 7

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 32
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 6
Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concern-
ing power and/or grounding should be directed toward a certi ed electrician.
Plug the washer into an exclusive, properly installed-grounded wall outlet.
Don’t use excessively hot water (50°C / 122°F or more). Plastic parts may be deformed or damaged. Also, clothing
may be deformed or bleached.
Before washing, check all pockets. If nails or pins remain in pockets, they may damage the washer or clothes.
Never splash water on the control panel.
Put your laundry into the washer evenly. Uneven laundry may cause noise or vibration.
BEFORE USING YOUR PORTABLE WASHER
Installation Instructions
Before you install the portable washer, select a location with the following characteristics:
A hard level surface.
Away from direct sunlight. Direct sunlight may affect the acrylic coating, plastic and electrical components.
• Adequate ventilation.
Away from sources of heat such as coal or gas. Make sure that the washing machine does not stand on its power
cord. Ventilation openings must not be obstructed by carpeting when the portable washer is installed on a carpeted
oor.
SELECTING A LOCATION
If the oor is uneven adjust the adjustable foot (do not insert pieces of wood,
or any other objects under the foot).
Turn the nut clockwise to release the screw adjuster on the foot.
Rotate the foot to raise or lower it until it stands rmly on the ground.
Lock the foot in position by turning the nut counter-clockwise until it
comes up against the bottom of the machine.
For portable applications, the washing machine comes with four north/
south rollers that can easily be installed to assist in the movement of the
machine to and from the sink. Carefully (with the help of another person),
lay the unit on its back. Install the rollers into the bottom of the base as
depicted.
Return the machine to the upright position. When the machine is posi-
tioned for operation set the height of the adjustment foot slightly higher
than the front roller to prevent movement of the machine during wash and
spin operation.
NOTE: Not all movement will be totally eliminated, this is normal.
LEVELING LEG AND ROLLERS
890 mm
4
Fixed Foot
Roller
Roller
Fixed Foot
Adjustable foot
Roller
Roller
Fixed Foot
Bottom View
Seitenansicht 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare