Danby DPAC10030 Bedienungshandbuch PDF herunterladen (Seite 12)

External Water Tank Instructions (cont'd)

Position the external water tank on the

support tray, making sure the quick connect

on the water tank is aligned with the quick

connect at the back of the cabinet.

See Fig.37

4. To make the connection, simply "push" the

water tank quick connect into the cabinet

quick connect. You will hear a positive

"click" when the connection is made.

5. Install both covers on the water tank.

6. To release (disconnect) the external water

tank, push the (silver) "release" button

located on the cabinet quick connect, grasp

the recessed handles on each side of the

tank and remove.

See fig.38, 39

Fig.38

Fig.37

Fig.39

CAUTION

Always empty both water tanks before attempting to

move or re-locate the unit to another location.

Fig. 40

Make sure the Internal

ater Tank

is correctly

positioned inside the cabinet otherwise the unit will

not operate.

Fig. 40.

Internal Water Tank Safety Feature

This unit is equipped with a fail-safe switch

mechanism which prevents the unit from condensing

water in the event the water tank is accidentally

displaced and/or when the water tank is full. If this

situation occurs, the unit will signal (

BEEP) for 20

seconds, the bucket icon in the display will flash

continuously and the (RED) WATER FULL indicator

light will illuminate. This condition will remain steady

until the water tank is re-positioned and/or emptied.

NOTE: The fan motor will continue to operate

under this condition. This is normal, but no

cooling or dehumidifying will occur until the

internal tank is emptied and/or re-positioned.

(NOTE: It may take several minutes before the

compressor resumes normal operation)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 64 65

Kommentare zu diesen Handbüchern

Keine Kommentare

Danby DPAC10030 Bedienungshandbuch Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftentfeuchter Danby DPAC10030