Danby ADR3006 Bedienungsanleitung PDF herunterladen (Seite 9)

• Clavier de commande tactile (électronique)

• Auto-détection de l’hygrométrie ambiante

• Réglage selon l’hygrométrie ambiante (35% - 80%)

• Ventilateur à 2 vitesses (Haut/Bas)

• Mise en marche temporisée - protection (compresseur)

• Auto-dégivrage

• Témoin « réceptacle plein »

• Roulettes pour déplacement facile (4)

• Réservoir d’eau situé sur l’avant (amovible)

• Option de drainage direct (tuyau pas compris)

• Fonctionnement silencieux

• Filtre à air amovible

CARACTÉRISTIQUES

Tableau de

Commande

Entrée d’Air

Panneau de

Façade

Filtre à Air

(Panneau

Latéral)

Poignée

Composants de l’appareil

Réservoir d’Eau

Roulettes

Indicateur de Niveau

d’Eau

1. LED Readout (ROOM HUMIDITY): The LED

window displays the following information

independently;

A. Internal (Room Environment) Relative

Humidity Conditions.

B. Set Operating Relative Humidity Value.

NOTE: The LED readout is programmed to default to

display the ambient (room environment) relative

humidity conditions.

To view the Set Operating Relative Humidity Value, (2.)

press the “up” or “down” button (once) and the set RH

operating value will flash for approximately 5 seconds in

the LED window, then revert back to display the internal

(room environment) RH value.

2. ON/OFF Button : Each time this button is pressed

the unit turns On (adjacent indicator light illuminates) or

Off (adjacent indicator light is not illuminated).

3. CONTINUOUS: Used for Continuous Dehumidifier

Operation. (unit will run non-stop) NOTE: Humidity

values (settings) cannot be programmed in this mode.

The adjacent (green) indicator light illuminates to signify

the ‘continuous’ mode is currently in operation.

4. HUMIDITY UP: This button allows you to increase

the relative humidity setting. Each time this button is

pressed the RH value setting is increased incrementally

by 5%. (ranging from 35% ~ 80%)

5.. HUMIDITY DOWN: This button allows you to

decrease the relative humidity setting. Each time this

button is pressed the RH value setting is decreased

incrementally by 5%. (ranging from 80% ~ 35%)

6. HIGH FAN:

The adjacent (green) indicator light

illuminates when HIGH FAN is selected.

7. LOW FAN:

The adjacent (green) indicator light

illuminates when LOW FAN is selected

8. WATER FULL INDICATOR:

This (red) light

illuminates under the following conditions;

A. When the internal water tank is not properly

installed inside the cabinet.

B. When the internal water tank is full. The

Water tank must be emptied and replaced back

in the cabinet before normal operating

conditions can resume.

KEY PAD FUNCTIONS.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Danby ADR3006 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Danby ADR3006